Berger Everglow Low Sheen
A superb adhesive low sheen paint for great coverage. Specially formulated  to provide protection against cracking, peeling and chalking whilst offering salt and dirt-resistant properties. Everglow is fungus and algae resistant and is easy to apply by brush, roller or spray. Its superb adhesion, great coverage and easy clean-up in water make Everglow a great product for wood and wall.
A superb adhesive low sheen paint for great coverage. Specially formulated  to provide protection against cracking, peeling and chalking whilst offering salt and dirt-resistant properties. Everglow is fungus and algae resistant and is easy to apply by brush, roller or spray. Its superb adhesion, great coverage and easy clean-up in water make Everglow a great product for wood and wall.
SURFACE PREPARATION
New Surfaces – Sand new surfaces to a smooth finish. Use Berger Sanding Sealer prior to application of Berger Wood Primer Undercoat or Berger Grip & Seal. Allow the recommended time for drying. Apply two coats of Berger Everglow Low Sheen Emulsion.
Previously Painted Surfaces – Ensure that dirt, stains, loose material and contaminants etc are removed. If the surface is cracking or peeling, remove the loose material by scraping. Thoroughly dust to ensure a clean surface. Treat any fungal or algal growth with Berger Biocidal Solution. Apply one coat of Berger Wood Primer Undercoat or Berger Sanding Sealer. Allow to dry for the recommended period. Apply two coats of Berger Everglow Low Sheen Emulsion
GYPSUM
Sand to a smooth finish and remove all dust. Apply one coat of Berger Unoshield seal with Berger Gypsum Primer or Berger Alkali Sealer. Allow to dry for the recommended time. Apply two coats of Berger Everglow Low Sheen Emulsion
METAL SURFACES.
Iron & Steel should be thoroughly cleaned to remove all oil, grease, rust, scale and moisture. Prime metal with a suitable Berger Metal Primer, such as Berger Grip & Seal or Berger Zinc Chromate Primer. Apply two coats of Berger Everglow Low Sheen Emulsion Aluminum & Zinc should be degreased and etched with Berger Self Etch Primer. Allow to dry and apply two coats of Berger Everglow Low Sheen Emulsion.
Additional information
| Size |
1 Gallon, 1 Quart, 5 Gallon
|
| Colour |
Available in over 2,000 colours from our Colour Library.
Ability to match any other colour you can dream of.
View colours: https://colourshop.com/trinidad/shop-by-colour-family/
|
| Usage |
AREAS OF USE: Interior and Exterior
SUBSTRATE: New plaster, brickwork, concrete, particle board, masonry and primed metal surfaces
|
| Physical Data |
FINISH: Smooth
COVERAGE: 300 – 450 ft2/gallon (7 – 11 m2/L) Practical coverage depends on the porosity and texture of the surface. Some colours may require a coloured primer
DRYING TIME: Touch dry – 15 minutes; Recoat – 1 hour
GLOSS LEVEL: Low Sheen
|
| Application |
Brush, Roller or Spray
Stir gently before application to avoid the incorporation of air
For best results, apply one coat of Berger Alkali Sealer to prime all new concrete/cement surfaces
Before applying to wood, apply one coat of Berger Grip & Seal Multi-Surface Primer
|
| DISCLAIMER |
These suggestions and data are based on information we believe to be reliable. They are offered in good faith but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any patent or regulations.
|
