Berger Contractor Primer
Berger Contractor Primer is an excellent latex based emulsion primer specially formulated for concrete surfaces. Its high solid content gives it great hiding power and an excellent spreading rate. Berger Concrete Primer is low odour , low voc and lead free. It has very good alkali resistance, strongly adheres to the concrete and very good algal and fungal resistance.
Berger Contractor Primer is an excellent latex based emulsion primer specially formulated for concrete surfaces. Its high solid content gives it great hiding power and an excellent spreading rate. Berger Concrete Primer is low odour , low voc and lead free. It has very good alkali resistance, strongly adheres to the concrete and very good algal and fungal resistance.
SURFACE PREPARATION:
CONCRETE, PLASTER, MASONRY
If the surface is previously painted ensure that dirt, stains, loose material and contaminants are removed. If the surface is friable, remove the friable and loose material by wire brush or scraping. Thoroughly dust down the entire surface. Treat fungal growth, if any with Berger Biocidal Solution as a cleaning agent and a pre primer coat. Apply one coat of Berger Contractor Primer and allow it to dry for a minimum of one hour before top coating to concrete that has cured for at least 28 days
Additional information
| Size |
1 Gallon, 5 Gallon
|
| Colour |
White
|
| DESIGN USE |
AREAS OF USE Interior and Exterior
SUBSTRATE Plaster, Brickwork, Cement Rendering, Concrete and Plaster Boards
|
| PHYSICAL DATA |
FINISH: Matte
COLOUR: White
COVERAGE: 300-400 ft2 /gallon (7-10 m2 /L)
DRYING TIME: Touch dry – 15 minutes; Topcoat – 1 hour
GLOSS LEVEL: Flat
VOC: <10g/L (Near zero VOC)
|
| APPLICATION DATA |
Ensure adequate ventilation during application and drying.
Use up to 250mls of clean water per 3.8L for thinning if necessary for ease of application depending on the method being used
Brush or Roller : Apply an even coat taking care to avoid runs and sags
Spray : Use conventional spray equipment.
: Airless 2000 – 2700 psi; Tip 0.17” – 0.020”
|
| DISCLAIMER |
These suggestions and data are based on information we believe to be reliable. They are offered in good faith but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any patent or regulations.
|
