Berger Weatherproof Ultra Emulsion Paint/Semigloss is a premium quality 100% acrylic exterior paint, specially formulated to provide a long-lasting durable finish, resistant to the most severe tropical weather. Berger Weatherproof Ultra provides a tough, weather-resistant, decorative finish on concrete, cement board, masonry and properly prepared wooden surfaces. It offers superior resistance to moisture, fungus and algae. When used according to the recommended application this coating qualifies for Berger’s seven-year warranty. Excellent for commercial and residential application including buildings in coastal areas.
PRODUCT PROPERTIES
• Excellent durability • For wood, concrete and metal
• Excellent abrasion resistant • Superior algal, fungus and mold resistance
• Seals hairline cracks • Water resistant
• Excellent flow and leveling • Superior ultraviolet light resistant properties
• Easy cleanup with water • Excellent performance in coastal & industrial environments
SURFACE PREPARATION
Previously Painted Surfaces – Ensure surface is clean, dry and free of dust, grease, algae, dirt and contaminants. Treat fungal or algal growth by first power washing the substrate then scrubbing with Berger Biocidal Solution. Rinse thoroughly with clean water and allow drying. Apply another coat of Berger Biocidal Solution. The Biocidal Solution must be top coated within the same day and before it is affected by rain with Berger Weatherproof Ultra. Surfaces showing cracking, peeling, chalking or efflorescence should be wire brushed, scraped and sanded to remove loose flaking material and reduce previous film to a flat finish. Thoroughly dust down the entire surface then apply one coat of Berger Alkali Sealer followed by two coats of Berger Weatherproof Ultra
WOOD
New Surfaces – Sand new surfaces to a smooth finish in the direction of the wood grain. Use Berger Sanding Sealer or Berger Wood Primer Undercoat or Berger Grip & Seal. Allow the recommended time for drying. Apply two coats of Berger Weatherproof Ultra Previously Painted Surfaces Ensure that dirt, stains, loose material and contaminants etc are removed. If the surface is cracking or peeling, remove the loose material by scraping. Thoroughly dust to ensure a clean surface. Treat any fungal or algal growth with Berger Biocidal Solution. Apply one coat of Berger Wood Primer Undercoat or Berger Alkali Sealer. Allow to dry for the recommended period. Apply two coats of Berger Weatherproof Ultra
METAL SURFACES
Iron & steel should be thoroughly cleaned to remove all oil, grease, rust, scale and moisture. Prime metal with a suitable Berger Metal Primer, such as Water Base Berger Grip & Seal MultiSurface Primer, & Berger Zinc Chromate Primer. Apply two coats of Berger Weatherproof Ultra Aluminum & Zinc should be degreased and etched with Berger Self Etch Primer followed by one coat of Berger Metal Primer. Allow to dry and apply two coats of Berger Weatherproof Ultra.
