Berger Concrete Primer

Berger Concrete Primer is a low odor, fast drying and an excellent latex-based emulsion primer, specially formulated for new interior and exterior, cured concrete walls in a tropical environment. It has proven to be a very economical choice in providing good hiding-power, excellent spreading rate and a high solids content.

Anti-Fungal and Anti-Algal Properties
For interior and exterior use
Excellent Hiding Power

Surface preparation:

Surface must be clean, free contaminants, mould and mildew
Scrape off loose paint and sand to a smooth surface
New plaster must be cured at least 30 days before priming
For adhesion on glossy surfaces, scuff sand surface thoroughly before priming
Treat fungus and algae with Berger Sterilizing Solution

Tips: Primers provide an extra wear-layer and facilitate adhesion of the topcoat to its surface and are ideal especially in cases of extreme exposure.

Additional information

Size	1 Gallon, 5 Gallon
Colour	White
Application	Ready-to-use formulation Apply by brush, roller or sprayer No mixing required Stir thoroughly before and occasionally during use Dilute no more than 10% water for spray application Prime the entire surface to ensure a uniform appearance of the topcoat Berger ALD Concrete Primer is tintable Tinting recommended in a lighter shade than the topcoat when painting dark colours *Application in wet humid conditions will slow drying time
Usage and Physical Data	Areas of Use: Interior / Exterior Substrate: As a primer on new concrete and cement surfaces. Not recommended for exteriors exposed to direct sea blast. Finish: Not Applicable Colour: White Spread Rate: Dependent on Temperature and porosity of surface Drying Time: Touch – 15Minutes, Recoat – 1 hour