Berger Water-Based Floor Paint
Berger Water Base Floor Paint is a specially formulated 100% acrylic floor coating, specifically designed for use on properly prepared interior and exterior floors, porches, patios, and other wood and cementitious surfaces. Its smooth low sheen finish provides excellent weather resistance, hardness and durability which resists fading, peeling and chipping. . It applies easily, is an environmentally friendly fast drying coating with excellent coverage. BERGER WATER BASE FLOOR PAINT is fungus, algai and mildew resistant, and may be applied to well prepared, previously painted surfaces. It offers excellent product versatility and is available in popular standard colours.
Berger Water Base Floor Paint is a specially formulated 100% acrylic floor coating, specifically designed for use on properly prepared interior and exterior floors, porches, patios, and other wood and cementitious surfaces. Its smooth low sheen finish provides excellent weather resistance, hardness and durability which resists fading, peeling and chipping. . It applies easily, is an environmentally friendly fast drying coating with excellent coverage. BERGER WATER BASE FLOOR PAINT is fungus, algai and mildew resistant, and may be applied to well prepared, previously painted surfaces. It offers excellent product versatility and is available in popular standard colours.
SURFACE PREPARATION
Concrete
• Should be swept clean of dirt and loose particles
• Grease should be removed by washing with a diluted soap solution, then wash the surface off thoroughly with clean water
• Smooth concrete should be treated with Berger concrete Etching Solution then wash off with clean water, allow to dry before application of two coats of Berger Water Based floor paint allowing one hour between coats
Wooden Floor
• Should be cleaned of any dirt or loose particles
• Any flaking paint or old polish should be removed
• Floor boards should then be primed with Berger Undercoat Wood Primer, allowed to dry, then coated with two coats of Berger Water Base Floor Paint, allowing one hour between coats
Additional information
| Size |
1 Gallon, 1 Quart, 5 Gallon
|
| Colour |
Green, Pewter, Tile Red
|
| Usage and Physical Data |
Areas of use: Interior and Exterior
Substrate: Concrete or wooden floors
Coverage: 9sq.m. _10 sq.m./L, (350-400ft2 /gallon) depending on texture and porosity of the surface
Drying time: Touch dry – 15 minutes; Recoat – 1 hour
Thinner: Clean Water
Storage: Store in a cool, shaded, dry area
Hazard Rating: Non-flammable; non-toxic and lead free
Finish: Glossy
|
| APPLICATION DATA |
Ensure adequate ventilation during application and drying. Do not apply when humidity exceeds 95% and condensation is likely. Use up to 250mls of clean water per 3.8L for thinning if necessary for ease of application. Apply two coats of BERGER WATER BASE FLOOR PAINT.
BRUSH OR ROLLER: Apply an even coat taking care to avoid runs and sags
SPRAY: Use conventional spray equipment
: Airless 1000- 3000 psi; Tip 0.15”- 0.18”
|
| DISCLAIMER |
These suggestions and data are based on information we believe to be reliable. They are offered in good faith but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any patent or regulations.
|
