Penta Ceiling White Emulsion is a high opacity ceiling finish, based on a durable acrylic resin. It has good non-drip properties for easy application, and gives a pleasing matt finish on concrete, plaster, wallboard and wooden ceilings. It has good fungus resistance and is easy to clean.
RECOMMENDED TYPICAL USES:
All types of interior ceilings, including concrete, cement rendering, gypsum plaster, wood and building boards such as soft (celotex), medium and hardboards, chipboard, plywood etc.
PRODUCT ADVANTAGES
• High hiding (opacity) • Easy to apply
• Non-drip • Quick Drying
• Fungus resistance • Washable with sponge/ liquid detergent in water
• Water-thinnable, clean-up
SURFACE PREPARATION
NEW AND UNPAINTED: Ensure that surfaces are dry and cleaned free of all dirt, dust, grease, wax, oils, parting compounds, fungal and algal growths, and other debris and contaminants.
MASONRY: Ensure that the surfaces have thoroughly dried out, allowing cement-rendered surfaces to cure for 4 weeks, and poured concrete for 8 weeks. Fill any surface defects (holes, cracks, crevices etc.) with an appropriate masonry filler.
WOOD: New wood must be cured, dry and clean. Treat all knots with Penta Knotting Varnish. Fill all cracks, holes etc. with an appropriate wood putty (Stopper) or filler, priming first with Penta Wood Primer Undercoat.
CHIPBOARD: Single layer, open-surface chipboards may require sanding and overall filling with oil or water- based fillers if a high standard of finish is required, but the surface must be primed first with an oil-based primer such as Penta Wood Primer Undercoat.
PREVIOUSLY PAINTED: Remove all loose, flaking, peeling and semi-adherent paint, sanding to a feather-edge where necessary, and remove all contaminants to obtain a clean, firm, sound surface. Fill surface defects as for new surfaces. Rub down smooth glossy surfaces.
